Installation of Oracle Internet Directory 12c Software and 12c Infrastructure Software In Collocated Mode

       Installation of Oracle Internet Directory 12c Software and 12c Infrastructure 
                                     Software In Collocated Mode

      Installation of 12c "Oracle Fusion Middleware infrastructure" Software
      must be done as a first step

      Installation of OID and OID setup

            1. Installation of 12c "Oracle Fusion Middleware infrastructure"

                Software must be done as a first step.

                Execute following command and follow the screen shots.

            1.1 .Go to the location where software’s are placed in your environment

                     In my case it is /home/oracle/IDAM12C/OIMInfra

           1.2. Inside OIMInfra you should be able to see 
                  fmw_12.2.1.3.0_infrastructure_Disk1_1of1

           1.3 Execute below command and follow the screen shots.

                 java –jar fmw_12.2.1.3.0_infrastructure.jar

 

         Once you hit enter on above command you should be able to get GUI 
         window for installation  and below screen shots are as following:

                  1.  Select Next

                  2. Choose whichever option you need.
                      Here it has been Selected option to skip Auto updates.Select Next

                   3. Choose the directory into which Infrastructure 
                       must be installed Select Oracle_HOME as /u04 and
                       select Next(In my case Oracle_Home is /u04 defined your location

                       as per your environment)

 4. In Installation Fusion Middleware Infrastructure is selected by default.

                        5. Select Next and wait for completion to 100%.

                            Here it will check for operating system certification and java version

                            used to launch the installer

                     6. In installation summary if you want to save Response File save it 
                         and click on Install.

                     7. Click on Next and wait until its completes 100%

                     8. Click on Finish

2. Installation Of OID12C

             2.1 .Go to the location where software’s are placed in your environment

                     In my case it is /home/oracle/IDAM12C/OID

             2.2. Inside OID folder you should be able to see

                    fmw_12.2.1.3.0_oid_linux64.bin             

2.3 run ./fmw_12.2.1.3.0_oid_linux64.bin 

           2.4 In my case installation type is collocated, and install OID.

                 Collocated mode would expect FMW Infrastructure

                 installed in Oracle Home.Screen shots for reference are as following:

                 1. Select Next

                   2. Choose whichever option you need. 

                       Here it has been selected option to skip Auto updates.

                        Select Next

             3.  Choose the directory into which Infrastructure must be installed.

                 Select Oracle_HOME as /u04 and select Next

                (In my case Oracle_Home is /u04

                 Defined your location as per your environment)

            4. In Installation type Collocated Mode is selected.

                In Other option Standalone is not allowed since 

                we have chosen Infrastructure Oracle Home location in previous step.

                Select Next.                                

              5. Specify JDK location as per your location and click on Next

          6. Click on Next and wait until its completes 100%

             7. In installation summary if you want to save Response 

                File save it and click on Install 

            8. Click on Next and wait until its completes 100%

            9.Click on Finish

3. To Configure OID in the same domain .That is in Collocated Mode.

          1. Creation of Schema using RCU: Creating database schema using 

              Repository Creation Utility to be installed and configured. 

              The database should be up and running.

          1.1. Start the RCU – Execute following command

               /u04/oracle_common/bin/rcu

               In this case we are using location :- /u04/oracle_common/bin/rcu

               Screen shots are as follows below

          1.2. Once if you hit. /rcu you will get GUI window

                 In Repository Creation Utility welcome screen Select Next

        1.3. In Create Repository by default “Create Repository” and
              “System Load and Product Load is selected. Select Next

           1.4. In Database connection details you must provide your
                  Oracle Database details and click on Next

                Note:-Ensure your Oracle Database is up and running. Note here

                         “Connection Parameters”option is selected. And Database

                          Type selected is “Oracle Database”

           1.5. Here it will check for prerequisites and select ok once it completes.

           1.6  In my case PROD2 is given.

                  And also choose Oracle Internet Directory schema as below and

                  click on Next.

               1.7. Here it will check for component Prerequisites,
                      once checking is done select ok.

          1.8. In Schema Passwords section in my case I am using same password for all

                 Schema is selected by default.

                 Provide a password and select next                          

             1.9. In Map Table-spaces screen select Next

             2.0. Select Ok on pop up window

               2.1. Select Ok on pop up window once it completes

               2.2. Save response file if required for reference. Note down database details
                      and click on create

               2.3. Once it is complete in completion summary note down rcu log and

                      other log paths it shows.

                           And click on Close                              

4. Configuring OID domain using the configuration wizard

     1.1 In my case in following below location
           /u04/oracle_common/common/bin

     1.2 Run ./config.sh 

     1.3 Following below screen appears

           Default Create a new Domain is selected.

           It would be the same as OID and Infrastructure directory Path 

           (in my case it is /u04/) under which, Domain must be created.

           In my case Domain Location is /u04/user_projects/domain/oiddomain

           Select Next.

        1.4. Choose Oracle Internet Directory -12.2.1.3.0 [oid] and

               Oracle Directory Service Manager - 12.2.1.3.0[oid] template

               under Templates wizard  screen.

               Note that this makes Oracle JRF auto selected.

               Select Next

         1.5. Specify Domain Name,Domain Location , and Application Location

          1.6 In Administrator Account provide a username.

                Weblogic is the default username it takes.

                You can continue or change the name.

                Here weblogic username is given. Select Next 

            1.7. In Domain Mode and JDK choose either of the option.
                   Here in my case Production is selected.
                   Ensure JDK path is correct.
                  Select Next   

            1.8. In Database Configuration Type select auto configuration type as
                   RCU data in my case I have selected as RCU Data if you want to select
                   Manual Configuration you can go ahead with Manual configuration also
            1.9  Provide database details in which schema's were created using
                   RCU in previous step, under Database Configuration Type screen.
                   Under Connection Parameters provide correct details.
            2.0  Click/select Get RCU Configuration.

           2.1. Click on Get RCU Configuration you should able to see a successfully

                   done message at  bottom of  the screen. Then click on Next to continue

           2.2. If you are going with Manual Configuration provide as below 

                 info required or click on Next

           2.3. In JDBC test ensure that test selected are successful .
                  Once successful click on Next

             2.4. In Advanced Configuration do not select any component until
                    and unless if you want to set some advanced configurations.
                    Here in my case i have selected
                    Administration Server, Node Manager, Topology,

                    Note:-Select Options as per your requirement.

                     Then click on Next                             

               2.5 In Administration Server provide Server Name,Listen Address,
                     Listen Port If you want to use SSL select Enable SSL or Click on Next

                2.6 In Node Manager configuration in my case i am using
                      Node Manager Type as Per Domain Default location.
                      Base on requirement you can choose Node Manager Type
                      and provide Node Manger credentials and click on Next

                     2.7 Click on Next

                     2.8 Click on Next

                       2.9 Click on Next

                       3.0 Click on Next

                         3.1 In Machine add Machine and click on Next

                       3.2 Assign Servers to Machine oidhost1

                          3.3 Click on Next

                       3.4 Click on Next

                      3.5 Click on Next

                    3.6 Click on Create

                     3.7  In Configuration Process you must see

                             the next screen with 100%. once done click on Next

                     3.8  In End Configuration you can able to see

                              Domain Location and Admin Server URL.

                              Then Click on Finish

5.Creating OID Instance using wlst tool

1.Go to below location:-/u04/oralce_common/common/bin

run ./wlst.sh

                                 2. Once you have run ./wlst.sh it will be connected to
                                     Weblogic Server Administration Scripting Shell
                                     To connect use following commands as per below screenshot
                                              1.connect()
                                              2.Enter username as weblogic
                                              3.Enter your password
                                              4.Enter your server URL and click on Enter                           

                                3.run the 'oid_setup()' command to create the initial

                                   'oid1' system component.In its most basic state the command 

                                   only requires the 'orcladminPassword', 'odsPassword', 

                                   and 'realmDN' parameters.This will create the 'oid1' instance 

                                   with the default Non-SSL port of 3060 and the SSL port of 3131.

Command:-oid_setup(orcladminPassword='XXXXXX',odsPassword='XXXXXX',

                   realmDN='dc=projectA,dc=com')

Note:-Once above command completed the 'oid1' instance will be started.

                              4. Once completed we can verify the installation.
                                  Use the wlst command 'oid_listInstances()'to list all
                                  OID instances in this domain

                              5. Run 'oid_instanceStatus()' to review the status of a
                                 specific instance

                               6.  Run 'oid_getProperties()' to retrieve details such as how EM is
                                   set to connect to OID

           Note: - You can test basic connectivity to the OID Non-SSL and SSL

                        Ports with the $ORACLE_HOME/bin/ldapbind command.

Testing:-

1. Go to below path and start Weblogic server and ODS managed servers.

     /u04/user_projects/domains/OIDdomain/bin/startWeblogic.sh

     /u04/user_projects/domains/OIDdomain/bin/startManagedWeblogic.sh

      wls_ods1

2. Access the Weblogic,ODSM URL from Chrome, Firefox or I.E etc... and

       verify its working fine.

Below are screenshots for reference

Now you should be able to logon and perform other tests and config changes etc…

1. WLS Admin console (as the WebLogic Admin user)

               http[s]://<hostname>:9001/console

2. FMW Control (as the WebLogic Admin user) 

                http[s]://<hostname>:9001/em

3. ODSM Console

                  http[s]://<hostname>:9001/odsm

                  Once you logon to odsm console from browser

                  Click on connect to a directory and click on create a connection

                  Select Directory Type as OID and provide server,port,

                  username and password details and click on connect.

Thanks,
Aditya.